필수정보

IOT 개발에 많이 사용되는 wifi chip입니다. 

ipex안테나 연결이 가능하도록 되어있습니다.

ESP-M1 is encapsulated by the high performance chip ESP8285, which is equal to ESP8266 chip plus 1M Flash. 

The chip ESP825 is encapsulated a advanced Tensilica’s L106 32-bit CPU, together with SRAM. ESP825 has the full and complete WiFi fuction, which can used independently and alsoused as a slaver with other Hoster MCU, which can start directly from the out-built Flash. In addition, the built-in high-speed buffer is benefit for the system performance. Especially, ESP8285 can be used as a WiFi adapter by SPI/SDIO and/or I2C/UART interface, when it is applied to the other MCU design. 

More details, please visit this github link to get the manual and tools, https://github.com/SmartArduino/SZDOITWiKi/wiki/ESP8285---ESP-M1 

Product Features 

Ultra-small size;

Support serial to WiFi;

Wireless transparent transmission;

Long distance transmission with ultra-low power;

Support outboard antenna;

Bearing high temperature to 125 ℃, compared to the 85℃ for ESP8266.

Product Parameters 

SOC characteristics

Built-in Tensilica L106 ultra-low power 32-bit CPU, main frequency supports 80MHz and160MHz, and RTOS;

Built-in TCP/IP protocol;

Built-in one-channel 10-bit high precision ADC;

Outboard interface: HSPI, UART, I2C, I2S, IR Remote Controk, PWM, GPIO;

Deep sleep current is 10uA, the cut-off current is smaller than 5uA;

Wake,connect and transmission data package within 2ms;

The consume power is smaller 1.0Mw (DTIM3) when at stand by status;

Built in 1M byte for SPI Flash.

WiFi characteristics

Support 802.11 b/g/n/e/I;

Support Station, Soft AP, Soft AP+STA mode;

Support WiFi Direct (P2P);

Support CCMP (CBC-MAC, computation mode), TKIP (MIC, RC4), WAPI (SMS4), WEP (RC4), CRC etc., for hardware acceleration.

P2P finding, P2P GO mode/ GC mode and P2P power manage

WPA/PA2PSK and WPS;

802.11 securitycertification: pre-certification and TSN

Support 802.11n (2.4GHz);

802.1h/RFC1042 frame encapsulation;

Support seam less roaming;

Support AT remote update and cloud update (OTA);

Support Smart Config function (including Android and Ios device).

Module interface

2* UART;

1*ADC;

1*En;

1*wakeup pin;

1*HSPI;

1*I2C;

1*I2S

More than 10*GPIOs

Working temperature

-40℃-+125℃;

Module size

12.3mm*15mm(For M1 module)

Product Application 

Electronical appliance;

Smart power plug, smart light;

Infant monitor;

Sensor networks;

Security ID label;

Wireless location beacon;

Home automation;

Mesh networks;

IP video camera;

Wearable electronics;

Wireless location recognition;

Industrial wireless control;