필수정보

Product Discription 

XY-P40W is a high-power stereo Bluetooth audio module.Dual channels audio signal output.Built-in amplifier module therefore it can connect to loudspeaker directly.It is ideal for DIY wireless Bluetooth speakers and transponders.
  
    1>.Width work voltage range
    2>.Applicable multiple type speakers
    3>.Knob adjustment
    4>.Support reverse connection protection
    5>.Support short circuit protection
    6>.Self-recovery overheat protection
 
A.Parameters:
    1>.Product name:XY-P40W Stereo Bluetooth Power Amplifier Module
    2>.Model:XY-P40W
    3>.Work Voltage:DC 5V-24V
    4>.Communication distance:15meter(Max)
    5>.Channel:Dual channel
    6>.Output Power(at 1KHz):
        6.1>.Output power 20W*2 at 12V 4ohm
        6.2>.Output power 30W*2 at 16V 4ohm
        6.3>.Output power 30W*2 at 21V 8ohm
        6.4>.Output power 40W*2 at 24V 8ohm
    7>.Match speaker(40W~200W):
        7.1>.4ohm at 5V~16V
        7.2>.8ohm at 5V~24V
    8>.Work Temperature:-40℃~85℃
    9>.Work Humidity:0%~95%RH
    10>.Module Size:55*38*14mm
 B.Using steps: 

    1>.Choose the right speaker and connect as shown in wiring diagram.
    2>.Connect to right power supply from input terminal.LED indicator will flashing and it means that module enters pairing mode.And then speak prompt voice and it means that module is waiting for pairing.
    3>.Turn ON Bluetooth in phone.
    4>.Select Bluetooth device ‘XY-P40W’ in your Bluetooth device listing.
    5>.LED indicator will keep ON and it means that module is successfully connected and is waiting for playing.
    6>.Module will playing music after select music in phone.LED indicator will keep slowly blinking.
    7>.Increase volume by turn right potentiometer.
    8>.Decrease volume by turn left potentiometer.
    9>.Press potentiometer to play or pause music. 
    10>.Module will speak prompt voice if disconnected.
 
C.Application:
    1>.Modified speaker
    2>.Amplifier equipment
    3>.Car Bluetooth device
 
D.Note:
    1>.The power amplifier board should be as far away as possible from the WIFI signal (router) avoid signal interference.
    2>.Recommended power supply voltage DC 5~24V.Module will be damaged if input voltage is more than 26V.
    3>.Input voltage can not more than 16V if connect 4ohm speaker.
    4>.Input voltage can not more than 24V if connect 8ohm speaker.
    5>.It is recommended to use a power supply of 2A or higher.
    6>.Please don’t use too long wires to avoid signal interference.
    7>.It is recommended to use a speaker above 40W to avoid speaker damage.
    8>.Please read use manual and description before use.

본 제품은 아크릴 보호 케이스가 포함되어 발송됩니다.

Notice 

This Shopping mall do not give any advice and reference of products. Especially we try to support data, user guide based on manufacture. So languages are differ from manufactures. This conditions are not reason to return, and exchange. 
당사의 쇼핑몰은 판매하는 제품에 대해 어떤 조언이나 레퍼런스를 제공하지 않습니다. 제공되는 데이터는 공급사와 제조사의 데이터를 지원합니다. 따라서 제조사에 따라 사용되는 언어가 다를 수 있습니다.  이 사항이 제품을 반품하거나 교환의 사유가 되지 않습니다.