Specification
STM32F746ZGT6 in LQFP144 package
ARM®32-bit Cortex®-M7 + FPU + Chrom-ART™ Accelerator
216 MHz max CPU frequency
VDD from 1.7 V to 3.6 V
1 MB Flash
320 KB SRAM
GPIOs (168) with external interrupt capability
12-bit ADCs with 24 channels (3)
12-bit DAC channels (2)
USART/UART (8)
I2C (4)
SPI (6)
Advanced-control Timer (2)
Low-power Timer (1)
General Purpose Timers (12)
Watchdog Timers (2)
CAN 2.0B active (2)
SAI (2)
Random Generator (TRNG for HW entropy)
USB 2.0 OTG HS
USB 2.0 OTG FS
Ethernet
Features
Two types of extension resourcesArduino Uno Revision 3 connectivity
STMicroelectronics Morpho extension pin headers for full access to all STM32 I/Os
On-board ST-LINK/V2-1 debugger/programmer with SWD connectorSelection-mode switch to use the kit as a standalone ST-LINK/V2-1
Flexible board power supplyUSB VBUS or external source (3.3 V, 5 V, 7 - 12 V)
Power management access point
Three User LEDs
Two push buttons: USER and RESET
USB re-enumeration capability: three different interfaces supported on USBVirtual Com port
Mass storage (USB Disk drive) for drag'n'drop programming
Debug port
Ethernet 10/100Mbps
USART
제품 링크 : https://os.mbed.com/platforms/ST-Nucleo-F746ZG/
Notice
This shopping mall do not give advice and reference of all products. Especially we try to support data, user guide based on manufacture.
So languages are differ from manufactures. This condition is not reason to return, and exchange.